HP OfficeJet Pro 8600 All-In-One Printer Setup


Operator’s Manual for HP OfficeJet Pro 8600 Printer Setup

The HP OfficeJet Pro 8600 is a multifunction printer designed for small to medium-sized offices. It can perform tasks such as printing, scanning and faxing in a calming way. The printer features a 4.3-inch touchscreen display, automatic duplex printing, and a 50-page automatic document feeder. The OfficeJet Pro 8600 can print up to 20 pages per minute in black and white and 16 pages per minute in color. It also supports wireless printing via Wi-Fi or Ethernet connectivity. With its high-quality printing and scanning capabilities, the HP OfficeJet Pro 8600 is a reliable and efficient choice for any office setting.

Setting up the HP OfficeJet Pro 8600 is a breeze. After completing the setup and installing the software, you're ready to print, scan, copy, and fax documents with ease. Its user-friendly interface and intuitive controls ensure a smooth experience, allowing you to navigate and operate the printer effortlessly.

List of Features of HP OfficeJet Pro 8600

  • It offers versatile printing capabilities with up to 20 PPM in black and white and 16 PPM in color.
  • It has a flatbed scanner of size 8.5 x 11.7 inches.
  • It has 50-page automatic document feeder.
  • Provide high-quality scanning with a resolution of 4800 x 4800 dpi.
  • Supports faxing at a speed of up to 33.6 kbps.
  • Compatible with AirPrint and ePrint technology.
  • It is ENERGY STAR qualified and consumes up to 50% less energy compared to similar laser printers.

How to Set Up The HP OfficeJet Pro 8600 Printer

Printer Unboxing

  • Take out the printer from the box.
  • Remove all packaging and tapes from the outer section.
  • Remove protection from the control panel and scanner surface.
  • Recycle all packaging, and your printer is good to go for setup process.

Installing 2 Sides Duplex Printing Accessories

After unpacking the printer safely, it's time to install duplex printer accessories to make it comfortable for 2-sided printing. Follow the mentioned steps for installation of the duplex printing section.

  • Figure out duplex in the box and get it out from box.
  • Remove all protections, tapes and packaging material.
  • Turn the printer to its backside for installing duplex.
  • To install the duplexer, grip it by its edges while making sure the rollers face the printer.
  • Next, insert the duplexer into the slot located at the rear of the printer.
  • Finally, push the duplexer firmly into the printer until it clicks into position.

Power On and Setup Guide

  • First, plug in the printer to the nearest power switch, and turn it on.
  • Select your language, region and country, on the printer control panel.
  • After that select you date and time by clicking on control panel date section.
  • Choose your local data and time and click on confirm and done.

Setup Ink Cartridges in HP OfficeJet Pro 8600

  • Turn on the printer and wait for a while.
  • Open the ink cartridge access door.
  • Wait for the ink carriage to move to the center of the printer and become idle.
  • Remove the new ink cartridge from its package and remove the protective tape on it.
  • Hold the new cartridge by its sides and push it forward into the empty slot until it snaps into place.
  • Repeat the steps for other ink cartridge installations.
  • Close the ink cartridge access door.
  • Wait for the printer to align the ink cartridges automatically, which may take a few minutes.

Perform Paper Loading Process

  • Extend paper tray from the printer.
  • Open the paper-width guides by sliding them outwards.
  • Insert printer papers into the tray slot.
  • Adjust the paper-width guides until they rest snugly against the edges of the paper. Make sure the guides are not too tight that they cause the paper to bend.
  • Now, insert the tray pack into its slot and wait for it to align properly.
  • That's all you are done with the paper alignment and loading process.

Drivers Download for HP OfficeJet Pro 8600

  • Go to the website 123.hp.com/setup 8600.
  • Enter your printer model and number in the search box.
  • Click on the search button to begin the search for compatible drivers.
  • Select the appropriate driver for your operating system from the displayed options.
  • Click on the download, to start installing the drivers.
  • After the drivers have downloaded successfully, save them to your computer.
  • Follow the on-screen instructions to run the software and complete the installation process.

Software Installation UK for HP OfficeJet Pro 8600

  • First check your printer is connected with a good internet network.
  • Go to support.hp.com.
  • Click on the "Support" tab.
  • Type “HP OfficeJet Pro 8600" in the search section and click on "Search."
  • Select your OS from the drop-down list and click on "Change."
  • Choose the software you want to download for the OfficeJet Pro 8600.
  • Click on the "Download" button.
  • Follow the on-screen steps to complete the installation process.


Wireless Configuration for HP OfficeJet Pro 8600


  • Keep your printer turned on and connected to your Wi-Fi router.
  • Access the printer's "Control Panel" and select "Devices and Printers."
  • In the new window, click on the "Add a printer" link located in the top-right corner.
  • Choose your HP OfficeJet Printer model from the list of printers displayed and click "Next."
  • Wait for the printer to establish a successful connection with your Windows system.
  • Perform a "Test" print to confirm that your HP OfficeJet 8600 printer is properly connected.


  • Ensure both your printer and Wi-Fi router are connected to the same network.
  • Open the "Apple" menu and select "System Preferences."
  • A new window will appear on your screen.
  • Click on "Printers and Scanners."
  • Then, click on the "+" sign at the bottom left corner of the screen to add your HP OfficeJet 8600 printer.
  • Look on the top left side of the screen to confirm a successful connection between your printer and iOS device.


USB Configuration for HP OfficeJet Pro 8600


  • Turn on the printer and ensure a stable power supply.
  • Go to the "Settings" menu and select "Device and Printers."
  • Connect the USB port and LAN cable between your computer and printer.
  • Open the downloaded setup file and choose "USB" as the connection type when prompted.
  • Windows will automatically detect your printer's name.
  • Click on the printer name and follow the on-screen instructions to complete the installation process.


  • Connect the printer and Mac using the same USB cable, and ensure the printer is turned on.
  • Click on the "Apple" icon in the top-left corner of the screen, and then select "System Preferences."
  • Choose "Printers and Scanners" from the preferences window.
  • Click on the "+" sign below the list of printers.
  • Select "Add New Printer" to add your printer to the list.
  • Congratulations! You have successfully connected your HP OfficeJet 8600 printer to your Mac OS.

We Are Ready to Assist You with The Setup of Your HP OfficeJet Pro 8600 Printer.

If you are encountering any issues during the setup of your HP OfficeJet Pro 8600 all-in-one printer 123 Com Setup professional team is available to provide prompt assistance. We are well-versed in identifying and resolving printer issues in real-time, as well as guiding you through the setup process. Don't hesitate to reach out to us for expert support and guidance to ensure a seamless printer setup experience.


© 2023 | 123comSetup